Getting Started PTB

Getting Started

1. Fetch changes from upstream repo

2. Checkout tag of your select release. See releases. This guide assumesPTB-v2.0.

$ git checkout PTB-v2.0

3. Make sure repo is clean

4. Get pre-built bitstream.

$ make get_latest_bitstream TAG=PTB-v2.0

5. Build embedded software

$ make sdk_gen_projects PRJ=PTB

6. (Optional) Open a new terminal window and start debugging stream. Shows messages from embedded system once programmed.

$ make serial

7. Power on board

8. Generate bootloader and program flash

$ make gen_bootimage
$ make program_flash

9. Restart PTB

The serial debug window should have something like the following output: